Home


Rotary Vane
Rotary Piston
Liquid Ring
Dry Vacuum
Vacuum Systems

Liquid Ring Pumps

Liquid Ring Pumps

Liquid ring pumps are sealed with liquid and are ideal for pumping wet gas mixtures and even slugs of liquid. They are available in standard, all iron (no copper), and 316 stainless steel.

Low pressure performance is limited by the vapor pressure of the sealing liquid which can be water, oil, or process liquids. Most liquid ring pumps require water cooling, but air-cooled systems are available.

Single stage pumps operate best above 250 Torr and two stage pumps below.

CFM 10 TO 650

Typical Applications: Chemical and Pharmaceutical Process, Vapor Recovery, Deaeration, Extruders, Crystallizers, Condensers, Central Vacuum Systems

Ask for Data Steet numbers: Pump Data 4114, 4703, 4705, L/R Systems 4106 4116

Also, consider the Ulvac Heliot Vacuum Leak Detector in your order.


Booster / Liquid Ring Pump Systems

Booster/Liquid Ring Pump Systems

Vacuum boosters matched with liquid ring pumps have higher capacity and can pump at lower pressures than liquid ring pumps alone. These systems are ideal for pumping wet gas mixtures at low pressures. Peak operation is available over a moderate pressure range.

A wide variety of two stage and three stage systems are available. Oil-filled systems can avoid problems with corrosive contaminants and vapor pressure of sealant liquid at low pressures with warm sealant.

Ask Kinney for help in selecting the best combination for your application.

CFM 149 TO 4,500

Typical Applications: Vapor Recovery, Chemical Applications, Dryers and Evaporators

Ask for Data Sheet number 1139


Vapor Handling Systems

VHS Vapor Handling Systems

Kinney Vapor Handling Vacuum Systems were specifically designed for use in wet or corrosive processes where large quantities of condensable or oil soluble gases must be pumped at low pressures.

Kinney Vapor Handling Vacuum Systems are unique packaged systems which combine an oil sealed rotary piston vacuum pump and a liquid ring vacuum pump. The liquid ring pump maintains low pressure in the oil reservoir into which the mechanical pump discharges process gases or vapors, thus preventing contamination of the sealing oil. Vapor handling systems can also be incorporated with mechanical boosters; see KMBD/KT.

CFM 100 TO 778

Typical Applications: Meat and Poultry Processing, Vacuum Packaging, Vacuum Furnaces, Condenser Exhausters, Dryers and Evaporators,

Ask for Data Sheet number:

1138 Vapor Handling Systems





Visit our other sites: jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com, jbii.com
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Drive | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com
























.


DISCLAIMER - Something you must agree to before you read this website:


The information is believed to be accurate during the time of review, but there is no guarantee and/or warranty to the accuracy of any credit cards information found within the website. This is not a secure site and we do not recommend sending any credit card information via this site or by e-mail".










Part Numbers

mlr

klrc

kt

kvc

ktc

dry MLR-15A MLR-15A (R)
200649 klmr